Compaq Evo n160 Maintenance and Service Guide Compaq Evo N160 Series - Page 106
Disk cell RTC battery Mini PCI communications board
View all Compaq Evo n160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Removal and Replacement Procedures 9. Press in and hold the PC Card eject button 1 (Figure 5-28). 10. Lift up the front edge of the system board 2 until it clears the base enclosure. 11. Slide the front edge of the system board forward, away from the base enclosure, at an angle 3. Figure 5-28. Removing the System Board Refer to the following sections to remove components from the system board: I Memory expansion board (Section 5.4) I Fan assembly (Section 5.8) I Processor (Section 5.9) I Disk cell RTC battery (Section 5.13) I Mini PCI communications board (Section 5.14) Reverse the above procedure to install the system board. Maintenance and Service Guide 5-39
Removal and Replacement Procedures
Maintenance and Service Guide
5
–
39
9.
Press in and hold the PC Card eject button
1
(Figure 5-28).
10.
Lift up the front edge of the system board
2
until it clears the
base enclosure.
11.
Slide the front edge of the system board forward, away from
the base enclosure, at an angle
3
.
Figure 5-28. Removing the System Board
Refer to the following sections to remove components from the
system board:
■
Memory expansion board (Section 5.4)
■
Fan assembly (Section 5.8)
■
Processor (Section 5.9)
■
Disk cell RTC battery (Section 5.13)
■
Mini PCI communications board (Section 5.14)
Reverse the above procedure to install the system board.