Compaq Evo n160 Maintenance and Service Guide Compaq Evo N160 Series - Page 97
Disk Cell RTC Battery
View all Compaq Evo n160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Removal and Replacement Procedures 5.13 Disk Cell RTC Battery ✎ The disk cell RTC battery is included in the Plastics and Hardware Kit (spare part number 251365-001). 1. Prepare the computer for disassembly (Section 5.3) and remove the following components: a. Switch cover (Section 5.6) b. Keyboard and keyboard shield (Section 5.7) c. Display (Section 5.10) d. Top cover (Sevtion 5-11) 2. Lift up the back edge of the RTC battery and remove it from its socket on the system board (Figure 5-22). Figure 5-22. Removing the Disk Cell RTC Battery Reverse the above procedure to install the disk cell RTC battery. 5-30 Maintenance and Service Guide
5
–
30
Maintenance and Service Guide
Removal and Replacement Procedures
5.13 Disk Cell RTC Battery
✎
The disk cell RTC battery is included in the Plastics and
Hardware Kit (spare part number 251365-001).
1.
Prepare the computer for disassembly (Section 5.3) and
remove the following components:
a.
Switch cover (Section 5.6)
b.
Keyboard and keyboard shield (Section 5.7)
c.
Display (Section 5.10)
d.
Top cover (Sevtion 5-11)
2.
Lift up the back edge of the RTC battery and remove it from
its socket on the system board (Figure 5-22).
Figure 5-22. Removing the Disk Cell RTC Battery
Reverse the above procedure to install the disk cell RTC battery.