Compaq Evo n160 Maintenance and Service Guide Compaq Evo N160 Series - Page 99
Removing the Mini PCI Communications Board
View all Compaq Evo n160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Removal and Replacement Procedures 2. Disconnect the communications cable from the mini PCI communications board 1 (Figure 5-23). 3. Spread the retaining tabs to release the mini PCI communications board 2. The board tilts up at a 45-degree angle. 4. Remove the board by pulling it away from the connector at a 45-degree angle 3. Figure 5-23. Removing the Mini PCI Communications Board Reverse the above procedure to install the mini PCI communications board. 5-32 Maintenance and Service Guide
5
–
32
Maintenance and Service Guide
Removal and Replacement Procedures
2.
Disconnect the communications cable from the mini PCI
communications board
1
(Figure 5-23).
3.
Spread the retaining tabs to release the mini PCI
communications board
2
.
The board tilts up at a 45-degree angle.
4.
Remove the board by pulling it away from the connector at a
45-degree angle
3
.
Figure 5-23. Removing the Mini PCI Communications Board
Reverse the above procedure to install the mini PCI
communications board.