Compaq Evo n160 Maintenance and Service Guide Compaq Evo N160 Series - Page 82
Removing the Keyboard Shield and, Disconnecting the Keyboard Cable
View all Compaq Evo n160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Removal and Replacement Procedures 4. Remove the two silver M2 × 5 screws 1 that secure the keyboard shield to the base enclosure (Figure 5-12). 5. Remove the keyboard shield 2. 6. Release the ZIF connector 3 to which the keyboard cable is connected and disconnect the keyboard cable 4. Figure 5-12. Removing the Keyboard Shield and Disconnecting the Keyboard Cable 7. Remove the keyboard. Reverse the above procedure to install the keyboard and keyboard shield. Maintenance and Service Guide 5-15
Removal and Replacement Procedures
Maintenance and Service Guide
5
–
15
4.
Remove the two silver M2
×
5 screws
1
that secure the
keyboard shield to the base enclosure (Figure 5-12).
5.
Remove the keyboard shield
2
.
6.
Release the ZIF connector
3
to which the keyboard cable is
connected and disconnect the keyboard cable
4
.
Figure 5-12. Removing the Keyboard Shield and
Disconnecting the Keyboard Cable
7.
Remove the keyboard.
Reverse the above procedure to install the keyboard and
keyboard shield.