Compaq Evo n160 Maintenance and Service Guide Compaq Evo N160 Series - Page 93
Disconnecting the TouchPad Cable and, Removing the Top Cover Screws, and the silver
View all Compaq Evo n160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Removal and Replacement Procedures 7. Release the ZIF connector 1 to which the TouchPad cable is attached and disconnect the TouchPad cable 2 from the system board (Figure 5-19). 8. Remove the two black M2 × 9 screws 3 and the silver M2 × 7 screw 4 that secures the top cover to the base enclosure. Figure 5-19. Disconnecting the TouchPad Cable and Removing the Top Cover Screws 5-26 Maintenance and Service Guide
5
–
26
Maintenance and Service Guide
Removal and Replacement Procedures
7.
Release the ZIF connector
1
to which the TouchPad cable is
attached and disconnect the TouchPad cable
2
from the
system board (Figure 5-19).
8.
Remove the two black M2
×
9 screws
3
and the silver
M2
×
7 screw
4
that secures the top cover to the base
enclosure.
Figure 5-19. Disconnecting the TouchPad Cable and
Removing the Top Cover Screws