Compaq Evo n160 Maintenance and Service Guide Compaq Evo N160 Series - Page 73
Removing the Hard Drive from the Hard, Drive Sleeve
View all Compaq Evo n160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Removal and Replacement Procedures If the hard drive must be removed from the hard drive sleeve, perform the following steps: a. Remove the four black M3 × 4 screws 1 that secure the hard drive to the hard drive sleeve (Figure 5-4). b. Lift the hard drive straight up to remove it from the hard drive sleeve 2. c. Note the orientation and position of the hard drive shield 3 when removing the hard drive from the hard drive sleeve. ✎ The hard drive sleeve and shield are included in the Plastics and Hardware Kit (spare part number 251365-001). Figure 5-4. Removing the Hard Drive from the Hard Drive Sleeve 5-6 Maintenance and Service Guide
5
–
6
Maintenance and Service Guide
Removal and Replacement Procedures
If the hard drive must be removed from the hard drive sleeve,
perform the following steps:
a.
Remove the four black M3
×
4 screws
1
that secure the
hard drive to the hard drive sleeve (Figure 5-4).
b.
Lift the hard drive straight up to remove it from the hard
drive sleeve
2
.
c.
Note the orientation and position of the hard drive
shield
3
when removing the hard drive from the hard
drive sleeve.
✎
The hard drive sleeve and shield are included in the Plastics and
Hardware Kit (spare part number 251365-001).
Figure 5-4. Removing the Hard Drive from the Hard
Drive Sleeve