Compaq Evo n160 Maintenance and Service Guide Compaq Evo N160 Series - Page 74
Removing a Modular Media Bay Device, Use the notch in the modular media bay device bezel
View all Compaq Evo n160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Removal and Replacement Procedures 5. Remove a modular media bay device by following these steps: a. Turn the computer bottom side up with the front facing you. b. Slide and hold the modular media bay release switch 1 toward the back of the computer (Figure 5-5). c. Use the notch in the modular media bay device bezel 2 to slide the device to the left. d. Remove the device. Figure 5-5. Removing a Modular Media Bay Device Reverse the above procedure to install a modular media bay device. Maintenance and Service Guide 5-7
Removal and Replacement Procedures
Maintenance and Service Guide
5
–
7
5.
Remove a modular media bay device by following these
steps:
a.
Turn the computer bottom side up with the front
facing you.
b.
Slide and hold the
modular
media bay release switch
1
toward the back of the computer (Figure 5-5).
c.
Use the notch in the modular media bay device bezel
2
to slide the device to the left.
d.
Remove the device.
Figure 5-5. Removing a Modular Media Bay Device
Reverse the above procedure to install a modular media bay
device.