Compaq Pro 4300 Maintenance & Service Guide Pro 4300 All-in-One Business P - Page 55
sheet metal shielding first
View all Compaq Pro 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
7. To install a memory module, slide the SODIMM into the socket at approximately a 30° angle (1), then press the SODIMM down (2) so that the latches lock it in place (3). Figure 6-21 Installing a memory module NOTE: A memory module can be installed in only one way. Match the notch on the module with the tab on the memory socket. 8. Press the memory cover back in place. Insert the bottom edge of the memory cover into the sheet metal shielding first, then press the top edge of memory cover down. Ensure that all the tabs on the memory cover are pressed firmly against the sheet metal shielding. Figure 6-22 Replacing the memory cover The computer automatically recognizes the additional memory when you turn on the computer. 48 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis