Compaq Pro 4300 Maintenance & Service Guide Pro 4300 All-in-One Business P - Page 68

Stand,

Get Compaq Pro 4300 PDF manuals and user guides View all Compaq Pro 4300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 68 highlights

Stand The stand is secured with three Torx screws. You must remove the center access panel to remove the stand. To remove the stand: 1. Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 33). 2. Remove the center access panel (see Hinge Cover Panel on page 34). 3. Remove the three silver Torx screws (1) that secure the stand to the computer. 4. Lift the memory and drive access panel latches (2). 5. Slide the stand toward the top of the computer slightly (3), and then lift the stand off the computer (4). Figure 6-41 Removing the stand To replace the stand, reverse the removal procedures. Stand 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
Stand
The stand is secured with three Torx screws. You must remove the center access panel to remove
the stand.
To remove the stand:
1.
Prepare the computer for disassembly (see
Preparing to Disassemble the Computer
on page
33
).
2.
Remove the center access panel (see
Hinge Cover Panel
on page
34
).
3.
Remove the three silver Torx screws
(1)
that secure the stand to the computer.
4.
Lift the memory and drive access panel latches
(2)
.
5.
Slide the stand toward the top of the computer slightly
(3)
, and then lift the stand off the
computer
(4)
.
Figure 6-41
Removing the stand
To replace the stand, reverse the removal procedures.
Stand
61