Compaq Pro 4300 Maintenance & Service Guide Pro 4300 All-in-One Business P - Page 75
Remove the two silver Torx screws that secure the board to the computer.
View all Compaq Pro 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
9. Disconnect the cable from the sidekey board. NOTE: Be careful not to damage the cable when disconnecting it from the board. Do not pull on the wires. Figure 6-49 Disconnecting the sidekey board cable 10. Remove the two silver Torx screws that secure the board to the computer. Figure 6-50 Sidekey board screws 68 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis
9.
Disconnect the cable from the sidekey board.
NOTE:
Be careful not to damage the cable when disconnecting it from the board. Do not pull
on the wires.
Figure 6-49
Disconnecting the sidekey board cable
10.
Remove the two silver Torx screws that secure the board to the computer.
Figure 6-50
Sidekey board screws
68
Chapter 6
Removal and Replacement Procedures All-in One (AIO) Chassis