Compaq Pro 4300 Maintenance & Service Guide Pro 4300 All-in-One Business P - Page 74
Sidekey Board,
View all Compaq Pro 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Sidekey Board The sidekey board is located on the bottom left side of the computer (viewed from behind) under the main rear cover. It is secured with two Torx screws and has one connector. The associated cable connects to the front power switch assembly. To remove this cable, you must remove the stand bracket, disassembly of which is shown later in this document at Stand bracket on page 75. Figure 6-48 Sidekey board location To remove the sidekey board: 1. Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 33). 2. Remove the center access panel (see Hinge Cover Panel on page 34). 3. Remove the memory access panel (see Memory Access Panel on page 36). 4. Remove the drive access panel (see Drive Access Panel on page 38). 5. Remove the stand (see Stand on page 61). 6. Remove the optical drive (see Optical Drive on page 40). 7. Remove the top panel (see Top Panel on page 58). 8. Remove the rear cover (see Rear Cover on page 62). Sidekey Board 67