Compaq Pro 4300 Maintenance & Service Guide Pro 4300 All-in-One Business P - Page 65
Top Panel, Preparing to Disassemble the Computer, on Hinge Cover Panel, Memory Access Panel
View all Compaq Pro 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Top Panel The top panel is secured with two Torx screws. Removing it allows access to the webcam and allows you to remove the main rear cover. Figure 6-36 Top panel location To remove the top panel: 1. Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 33). 2. Remove the center access panel (see Hinge Cover Panel on page 34). 3. Remove the memory access panel (see Memory Access Panel on page 36). 4. Remove the drive access panel (see Drive Access Panel on page 38). 5. On the top of the computer, remove the two black Torx screws (1) that secure the top panel to the computer. 6. Rotate the top of the panel outward (2), and then lift the panel off the computer. Figure 6-37 Removing the top panel To replace the top panel, reverse the removal procedures. 58 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis