Compaq Pro 4300 Maintenance & Service Guide Pro 4300 All-in-One Business P - Page 79
Removing the WLAN module
![]() |
View all Compaq Pro 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
11. Disconnect the antenna cables from the module (1). 12. Remove the Phillips screw (2) that secures the module to the computer. Figure 6-55 Removing the WLAN module screw and antennas 13. Lift the module to a 45-degree angle, and then pull it away to remove it from the socket. Figure 6-56 Removing the WLAN module To install the WLAN module, reverse the removal procedures. NOTE: WLAN modules are designed with a notch to prevent incorrect insertion. 72 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis
![](/manual_guide/products/compaq-pro-4300-maintenance-service-guide-pro-4300-allinone-business-pc-03776ba/79.png)
11.
Disconnect the antenna cables from the module
(1)
.
12.
Remove the Phillips screw
(2)
that secures the module to the computer.
Figure 6-55
Removing the WLAN module screw and antennas
13.
Lift the module to a 45-degree angle, and then pull it away to remove it from the socket.
Figure 6-56
Removing the WLAN module
To install the WLAN module, reverse the removal procedures.
NOTE:
WLAN modules are designed with a notch to prevent incorrect insertion.
72
Chapter 6
Removal and Replacement Procedures All-in One (AIO) Chassis