Compaq Pro 4300 Maintenance & Service Guide Pro 4300 All-in-One Business P - Page 71
Removing the fan
View all Compaq Pro 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
10. Remove the three black Torx screws that secure the fan to the computer, and then disconnect the fan cable from the system board connector labeled CHASSIS_FAN1. Figure 6-44 Fan screws 11. Slide the fan toward the right to remove it from underneath the metal bracket, and then lift the fan from the computer. Figure 6-45 Removing the fan To install the fan assembly, reverse the removal procedures. 64 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis
10.
Remove the three black Torx screws that secure the fan to the computer, and then disconnect
the fan cable from the system board connector labeled CHASSIS_FAN1.
Figure 6-44
Fan screws
11.
Slide the fan toward the right to remove it from underneath the metal bracket, and then lift the
fan from the computer.
Figure 6-45
Removing the fan
To install the fan assembly, reverse the removal procedures.
64
Chapter 6
Removal and Replacement Procedures All-in One (AIO) Chassis