Compaq dc7100 HP Compaq dc71xx and dx61xx Series Business Desktop Computers Te - Page 89
IDE PATA Connector, IDE Bus Master Control Registers
View all Compaq dc7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Input/Output Interfaces IDE Bus Master Control Registers The IDE interface can perform PCI bus master operations using the registers listed in Table 5-2. These registers occupy 16 bytes of variable I/O space set by software and indicated by PCI configuration register 20h in the previous table. Table 5-2. IDE Bus Master Control Registers I/O Address Offset Size (Bytes) Register Default Value 00h 1 Bus Master IDE Command (Primary) 00h 02h 1 Bus Master IDE Status (Primary) 00h 04h 4 Bus Master IDE Descriptor Pointer (Pri.) 0000 0000h 08h 1 Bus Master IDE Command (Secondary) 00h 0Ah 2 Bus Master IDE Status (Secondary) 00h 0Ch 4 Bus Master IDE Descriptor Pointer (Sec.) 0000 0000h NOTE: Unspecified gaps are reserved, will return indeterminate data, and should not be written to. IDE (PATA) Connector These systems provide a standard 40-pin connector for a primary IDE device and in most factory configurations connects to a optical drive (CD or DVD). Some signals are re-defined for UATA/33 and higher modes. Device power is supplied through a separate connector. Figure 5-1. 40-Pin IDE (PATA) Connector. Technical Reference Guide 361834-002 5-3