D-Link DGS-1100-08V2 User Manual 1.00 WW - Page 26

4 Configuration D-Link Smart Managed Switch User Manual Community String Specify the community string for the management host. Table 4.10 Click Apply to make the configurations take effect. Management > D-Link Discovery Protocol For devices that support the D-Link Discovery Protocol (DDP), this page allows users to enable or disable DDP, and configure the DDP packet report timer. Figure 4.24 - Management > D-Link Discovery Protocol The fields that can be configured for D-Link Discovery Protocol are described below: Item Description D-Link discovery Specify to enable or disable the D-Link discovery protocol feature of Protocol State the Switch. Report Timer Configure the report timer of the D-Link Discover Protocol in seconds. The values are 30, 60, 90, 120 or Never. The default is 30 seconds. Table 4.11 Click Apply to make the configurations take effect. L2 Features > FDB > Static FDB > Unicast Static FDB The Unicast Static FDB page allows user to view and configure the static unicast forwarding settings on the Switch. Figure 4.25 - L2 Features > FDB > Static FDB > Unicast Static FDB The fields that can be configured for Unicast Static FDB are described below: Item Description Port Allows the selection of the port number on which the MAC address entered resides. VID Enter the VLAN ID of the VLAN which the corresponding MAC address belongs to. MAC Address Enter the MAC address to which packets will be statically forwarded or dropped. This must be a unicast MAC address. Table 4.12 Click Apply to make the configurations take effect. Click Delete All to delete all the entries found in the display table. 23