D-Link DGS-1100-08V2 User Manual 1.00 WW - Page 40
Security > Port Security, OAM > Cable Diagnostics
View all D-Link DGS-1100-08V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
4 Configuration D-Link Smart Managed Switch User Manual Storm Control Status Storm Control Threshold (8-1000000) Specify to enable or disable the storm control function. Specify the type of controlled packets, Options are Broadcast Only, Multicast & Broadcast, and Multicast & Broadcast & Unknown Unicast. If Storm Control is enabled, the Switch will start dropping packets of the specified type when exceeding this threshold. The threshold ranges from 8 to 1,000,000 kbps. Table 4.31 Click Apply to make the configurations take effect. Security > Port Security Port Security improves network security by restricting access on a specific port only to users with a specific MAC address. Ports can be locked to prevent users from modifying the MAC address forwarding table. Locking ports also prevents additional MAC addresses from being learned. Figure 4.48 - Security > Port Security The fields that can be configured for Port Security are described below: Item Description From Port / To Port Admin State Max Learning Address Specify a range of ports to be configured. Select Enable to lock down the port and the associated MAC address table. Select Disable to disable Port Security on the corresponding port(s). Define the maximum number of MAC addresses that can be associated with the corresponding port. This ranges from 0 to 4160. Table 4.32 Click Apply to make the configurations take effect. OAM > Cable Diagnostics The Cable Diagnostics is designed primarily for administrators and customer service representatives to quickly examine the quality of copper cables, recognize the cable type, and detect cable errors. Figure 4.49 - OAM > Cable Diagnostics 37