D-Link DGS-1100-08V2 User Manual 1.00 WW - Page 30
L2 Features > VLAN > Management VLAN, When 802.1Q Management VLAN is
View all D-Link DGS-1100-08V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
4 Configuration D-Link Smart Managed Switch User Manual Figure 4.33 - L2 Features > VLAN > Port-Based VLAN - Enabled Enter the VLAN Name and select the Member port to be created. Click Apply to make the configurations take effect. Click Cancel to discard any changed made and return to the previous page. L2 Features > VLAN > Management VLAN The 802.1Q Management VLAN setting allows user to transfer management authority of the switch from the default VLAN to another VLAN. This allows for more flexible network management. By default, the Management VLAN is disabled. You can select any existing VLAN as the management VLAN when this function is enabled. There can only be one management VLAN at a time. Figure 4.34 - L2 Features > VLAN > Management VLAN The fields that can be configured for Management VLAN are described below: Item Description Management VLAN Select to enable or disable the Management VLAN function. VID Select the VID to act as the managing VLAN. Table 4.17 Click Apply to make the configurations take effect. NOTE: When 802.1Q Management VLAN is enabled, the 802.1Q VLAN should be enabled first. L2 Features > VLAN > Asymmetric VLAN The Asymmetric VLAN allows for a more efficient use of shared resources, such as server or gateway devices. Figure 4.35 - L2 Features > VLAN > Asymmetric VLAN The fields that can be configured for Asymmetric VLAN are described below: Item Description 27