D-Link DGS-1100-08V2 User Manual 1.00 WW - Page 29
L2 Features > VLAN > Port-Based VLAN, Not Member
View all D-Link DGS-1100-08V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
4 Configuration D-Link Smart Managed Switch User Manual The fields that can be configured for 802.1Q VLAN are described below: Item Description VID Enter the VID to be created. VLAN Name Enter the VLAN name for the VID to be created. Port Assign ports as Untag, Tag or Not Member. Click All to select all ports. Table 4.16 Click Apply to create a new VID group. To configure the PVID settings, click PVID Settings and the following will be displayed: Figure 4.31 - L2 Features > VLAN > 802.1Q VLAN - PVID Settings Click Apply to make the configurations take effect. Click Cancel to discard any changed made and return to the previous page. L2 Features > VLAN > Port-Based VLAN Port-Based VLANs are the simplest and most common form of VLAN. It assigns physical LAN ports to VLANs, effectively broadening their application. You can assign multiple ports to the same VLAN, or each port to a separate VLAN. The default is disabled. Figure 4.31 - L2 Features > VLAN > Port-Based VLAN Select Enabled and click Apply to enable the Port-Based VLAN function and the following will be displayed: Figure 4.32 - L2 Features > VLAN > Port-Based VLAN - Enabled Click Rename to rename the VLAN group. Click Delete to remove the VLAN group. NOTE: When Port-Based VLAN is enabled, the 802.1Q VLAN settings and 802.1Q management VLAN settings would be set to default value automatically. To create a new Port-Based VLAN group, click Add VLAN and the following will be displayed: 26