D-Link DGS-1100-24P Reference Guide - Page 25
System Information Settings, IPv4 Interface
![]() |
View all D-Link DGS-1100-24P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
D-Link DGS-1100 Series Switch User Manual System Information Settings The user can enter a System Name, System Location, and System Contact to aid in defining the Switch. To view the following window, click System > System Information Settings, as shown below: Figure 5-2 System Information Settings window The fields that can be configured are described below: Parameter System Name System Location System Contact Description Enter a system name for the Switch, if so desired. This name will identify it in the Switch network. Enter the location of the Switch, if so desired. Enter a contact name for the Switch, if so desired. Click the Apply button to accept the changes made. IPv4 Interface This window is used to configure the IPv4 settings of the switch. To view the following window, click System > System Information Settings > IPv4 Interface, as shown below: Figure 5-3 Peripheral Settings window The fields that can be configured are described below: Parameter Get IP From IP Address Description Select DHCP to automatically obtain an IP address. Select Static to manually configure the IP address settings. BOOTP allows the switch to get an IP configuration using the BOOTP protocol. If Static is selected, enter the IP address of the switch. If DHCP or BOOTP is selected, the automatically obtained IP address will be displayed. 19
![](/manual_guide/products/dlink-dgs110024p-reference-guide-47bed4b/25.png)