D-Link DGS-1100-24P Reference Guide - Page 49
Auto Surveillance VLAN, Auto Surveillance Properties
View all D-Link DGS-1100-24P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
D-Link DGS-1100 Series Switch User Manual Parameter VLAN Mode Acceptable Frame Ingress Checking Action Allowed VLAN Range Description Select the VLAN mode option here. Options to choose from are Access, Hybrid, and Trunk. Select the acceptable frame behavior option here. Options to choose from are Tagged Only, Untagged Only, and Admit All. After selecting Trunk as the VLAN Mode the following parameter will be available. Select to enable or disable the ingress checking function. Select the action that will be taken here. Options to choose from are Remove, Tagged, and Untagged. Enter the allowed VLAN range information here. Click the Apply button to accept the changes made. Click the Back button to return to the previous window. Auto Surveillance VLAN Auto Surveillance Properties This window is used to configure the auto surveillance VLAN global settings and display the ports surveillance VLAN information. To view the following window, click L2 Features > VLAN > Auto Surveillance VLAN > Auto Surveillance Properties, as shown below: Figure 7-15 Auto Surveillance Properties window The fields that can be configured for Global Settings are described below: Parameter Surveillance VLAN Surveillance VLAN ID Surveillance VLAN CoS Aging Time Description Select this option to enable or disable the surveillance VLAN state Enter the surveillance VLAN ID. The range is from 2 to 4094. Select the priority of the surveillance VLAN from 0 to 7. Enter the aging time of surveillance VLAN. The range is from 1 to 65535 minutes. The default value is 720 minutes. The aging time is used to remove a port from surveillance VLAN if the port is an automatic surveillance VLAN member. When the last surveillance device stops sending traffic and the MAC address of this surveillance device is aged out, the surveillance VLAN aging timer will be started. The port will be removed from the surveillance VLAN after expiration of surveillance VLAN aging timer. If the surveillance traffic resumes during the aging time, the aging timer will be reset and stop. Click the Apply button to accept the changes made. 43