D-Link DGS-1100-24P Reference Guide - Page 40
SNMP Host Table Settings, Management > SNMP > SNMP Host Table Settings
![]() |
View all D-Link DGS-1100-24P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
D-Link DGS-1100 Series Switch User Manual Figure 6-3 SNMP Community Table Settings window The fields that can be configured are described below: Parameter Access Right Community Name Description Select the access right here. Options to choose from are Read Only, and Read Write. Read Only - SNMP community members using the community string created can only read the contents of the MIBs on the Switch. Read Write - SNMP community members using the community string created can read from, and write to the contents of the MIBs on the Switch. Enter an alphanumeric string of up to 16 characters that is used to identify members of an SNMP community. This string is used like a password to give remote SNMP managers access to MIB objects in the Switch's SNMP agent. Click the Apply button to accept the changes made. SNMP Host Table Settings This window is used to configure and display the recipient of the SNMP notification. To view the following window, click Management > SNMP > SNMP Host Table Settings, as shown below: Figure 6-4 SNMP Host Table Settings The fields that can be configured are described below: Parameter Host IPv4 Address User-based Security Model Community String Description Enter the IPv4 address of the SNMP notification host. Select the security model here. Options to choose from are SNMPv1, and SNMPv2c. SNMPv1 - Select to allow the group user to use the SNMPv1 security model. SNMPv2c - Select to allow the group user to use the SNMPv2c security model. Enter the community string to be sent with the notification packet. Click the Apply button to accept the changes made. 34
![](/manual_guide/products/dlink-dgs110024p-reference-guide-47bed4b/40.png)