D-Link DGS-1100-24P Reference Guide - Page 80
Firmware Backup to TFTP, Source, Backup
View all D-Link DGS-1100-24P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
D-Link DGS-1100 Series Switch User Manual Figure 13-5 Firmware Backup to HTTP window The fields that can be configured are described below: Parameter Source Description Select the source image to use for the firmware backup. Click the Backup button to initiate the firmware backup. Firmware Backup to TFTP This window is used to initiate a firmware backup to a TFTP server. To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to TFTP, as shown below: Figure 13-6 Firmware Backup to TFTP window The fields that can be configured are described below: Parameter TFTP Server IP Description Enter the TFTP server's IPv4 address here. Source Destination File Select the source image to use for the firmware backup. Enter the destination path and location where the firmware file should be stored on the TFTP server. Click the Backup button to initiate the firmware backup. 74