D-Link DGS-1100-24P Reference Guide - Page 26
IPv6 Interface, Port Configuration, Port Settings
![]() |
View all D-Link DGS-1100-24P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
D-Link DGS-1100 Series Switch User Manual Mask Gateway DHCP retry Time If Static is selected, enter the IP address of the switch. If DHCP or BOOTP is selected, the automatically obtained network mask will be displayed. If Static is selected, enter the IP address of the switch. If DHCP or BOOTP is selected, the automatically obtained gateway will be displayed. If DHCP is selected, enter the number of times to retry obtaining an IP address. Click the Apply button to accept the changes made. IPv6 Interface This window is used to configure the IPv6 settings of the switch. To view the following window, click System > System Information Settings > IPv6 Interface, as shown below: Figure 5-4 Peripheral Settings window The fields that can be configured are described below: Parameter IPv6 State Static IPv6 Address Description Select whether to Enable or Disable IPv6 functionality. If enabled, enter the static IPv6 address of the switch. Click the Apply button to accept the changes made. Port Configuration Port Settings This window is used to view and configure the Switch's port settings. To view the following window, click System > Port Configuration > Port Settings, as shown below: Figure 5-5 Port Settings window 20
![](/manual_guide/products/dlink-dgs110024p-reference-guide-47bed4b/26.png)