D-Link DGS-1100-24P Reference Guide - Page 48
Allowed VLAN Range, Untagged Only
![]() |
View all D-Link DGS-1100-24P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
D-Link DGS-1100 Series Switch User Manual Click the Back button to return to the previous window. When Hybrid was selected as the VLAN Mode, the following page will appear. Figure 7-13 Configure VLAN Interface - Hybrid window The fields that can be configured are described below: Parameter VLAN Mode Acceptable Frame Ingress Checking VID Action Allowed VLAN Range Description Select the VLAN mode option here. Options to choose from are Access, Hybrid, and Trunk. Select the acceptable frame behavior option here. Options to choose from are Tagged Only, Untagged Only, and Admit All. Select the check box to enable or disable the ingress checking function. Enter the VLAN ID used for this configuration here. This value must be between 1 and 4094. Select the action that will be taken here. Options to choose from are Remove, Tagged, and Untagged. Enter the allowed VLAN range information here. Click the Apply button to accept the changes made. Click the Back button to return to the previous window. When Trunk is selected as the VLAN Mode, the following page will appear. Figure 7-14 Configure VLAN Interface - Trunk window The fields that can be configured are described below: 42
![](/manual_guide/products/dlink-dgs110024p-reference-guide-47bed4b/48.png)