D-Link DGS-1100-24P Reference Guide - Page 31
PoE Configuration, System > PoE > PoE Configuration
View all D-Link DGS-1100-24P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
D-Link DGS-1100 Series Switch User Manual PoE Configuration This window is used to configure the PoE port. To view the following window, click System > PoE > PoE Configuration, as shown below: Figure 5-9 PoE Configuration window The fields that can be configured are described below: Parameter From Port / To Port Priority State Power Limit Max Wattage Time Profile Description Select the appropriate port range used for the configuration here. Select the priority for provisioning power to the port. Options to choose from are Critical, High and Low. Select this option to enable or disable the PoE functionality. Select the power management mode for the PoE ports. Options to choose from are Auto, Class 1, Class 2, Class 3, and Class 4. When selecting Auto in the Mode drop-down list, this option appears. Tick the check box and enter the maximum wattage of power that can be provisioned to the auto-detected PD. If the value is not entered, the class of the PD automatically determines the maximum wattage which can be provisioned. The valid range for maximum wattage is between 1000 mW and 30000 mW. Select the Time Profile from the drop down list. Note: The Time Profile drop down menu will only have available options if a time profile has been created. Click the Delete Time Range button to clear the setting in the corresponding Time Range field. Click the Apply button to accept the changes made. Note: The Max Wattage option will only be available if the check box next to the input field is enabled. When enabled, the Power Limit drop down menu will not be available. 25