D-Link DIS-300G-14PSW Product Manual - Page 110
NAS-IP-AddressAttribute, NAS-IPv6-AddressAttribute, NAS-Identifier Attribute 32, Delete, Hostname,
![]() |
View all D-Link DIS-300G-14PSW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Key The secret key - up to 63 characters long - shared between the RADIUS server and the switch. NAS-IP-Address(Attribute The IPv4 address to be used as attribute 4 in RADIUS Access-Request packets. If 4) this field is left blank, the IP address of the outgoing interface is used. NAS-IPv6-Address(Attribute The IPv6 address to be used as attribute 95 in RADIUS Access-Request packets. 95) If this field is left blank, the IP address of the outgoing interface is used. NAS-Identifier (Attribute 32) The identifier - up to 253 characters long - to be used as attribute 32 in RADIUS Access-Request packets. If this field is left blank, the NAS-Identifier is not included in the packet. Server Configuration Delete To delete a RADIUS server entry, check this box. The entry will be deleted during the next Save. Hostname The IP address or hostname of the RADIUS server. Auth Port The UDP port to use on the RADIUS server for authentication. Acct Port The UDP port to use on the RADIUS server for accounting. Timeout This optional setting overrides the global timeout value. Leaving it blank will use the global timeout value. Retransmit This optional setting overrides the global retransmit value. Leaving it blank will use the global retransmit value. Key This optional setting overrides the global key. Leaving it blank will use the global key. Buttons Click to add a new RADIUS server, up to 5 servers are supported. The button can be used to undo the addition of the new server. Click to save changes. Click to undo any changes made locally and revert to previously saved values. 110
![](/manual_guide/products/dlink-dis300g12sw-product-manual-363ddfb/110.png)