D-Link DIS-300G-14PSW Product Manual - Page 118
Shutdown Time, Enable, Action, Shutdown Port, Shutdown Port and Log, Log Only, Tx Mode
![]() |
View all D-Link DIS-300G-14PSW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Shutdown Time Port Configuration Port Enable Action Tx Mode to 10 seconds. The period (in seconds) for which a port will be kept disabled in the event of a loop is detected (and the port action shuts down the port). Valid values are 0 to 604800 seconds (7 days). A value of zero will keep a port disabled (until next device restart). The switch port number of the port. Controls whether loop protection is enabled on this switch port. Configures the action performed when a loop is detected on a port. Valid values are Shutdown Port, Shutdown Port and Log or Log Only. Controls whether the port is actively generating loop protection PDU's, or whether it is just passively looking for looped PDU's. Buttons Click to save changes. Click to undo any changes made locally and revert to previously saved values. 118
![](/manual_guide/products/dlink-dis300g12sw-product-manual-363ddfb/118.png)