D-Link DIS-300G-14PSW Product Manual - Page 139
VLAN Configuration
View all D-Link DIS-300G-14PSW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Command Descriptions 2.3.74 VLAN Configuration Each page shows up to 99 entries from the VLAN table, default being 20, selected through the "entries per page" input field. When first visited, the web page will show the first 20 entries from the beginning of the VLAN Table. The first displayed will be the one with the lowest VLAN ID found in the VLAN Table. The "VLAN" input fields allow the user to select the starting point in the VLAN Table. Object Delete VLAN ID IGMP Snooping Enabled Querier Election Querier Address Compatibility Description Check to delete the entry. The designated entry will be deleted during the next save. The VLAN ID of the entry. Enable the per-VLAN IGMP Snooping. Up to 32 VLANs can be selected for IGMP Snooping. Enable to join IGMP Querier election in the VLAN. Disable to act as an IGMP NonQuerier. Define the IPv4 address as source address used in IP header for IGMP Querier election. When the Querier address is not set, system uses IPv4 management address of the IP interface associated with this VLAN. When the IPv4 management address is not set, system uses the first available IPv4 management address. Otherwise, system uses a pre-defined value. By default, this value will be 192.0.2.1. Compatibility is maintained by hosts and routers taking appropriate actions depending on the versions of IGMP operating on hosts and routers within a network. The allowed selection is IGMP-Auto, Forced IGMPv1, Forced IGMPv2, Forced IGMPv3, default compatibility value is IGMP-Auto. 139