D-Link DIS-300G-14PSW Product Manual - Page 165
Object, Description, Allowed Access VLANs, Ethertype for Custom S, ports, Access
![]() |
View all D-Link DIS-300G-14PSW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Command Descriptions Object Description Global VLAN Configuration Allowed Access VLANs This field shows the allowed Access VLANs, i.e. it only affects ports configured as Access ports. Ports in other modes are members of all VLANs specified in the Allowed VLANs field. By default, only VLAN 1 is enabled. More VLANs may be created by using a list syntax where the individual elements are separated by commas. Ranges are specified with a dash separating the lower and upper bound. The following example will create VLANs 1, 10, 11, 12, 13, 200, and 300: 1,10- 13,200,300. Spaces are allowed in between the delimiters. Ethertype for Custom S- This field specifies the ethertype/TPID (specified in hexadecimal) used for Custom S- ports ports. The setting is in force for all ports whose Port Type is set to S-Custom-Port. Port VLAN Configuration Port This is the logical port number of this row. Mode The port mode (default is Access) determines the fundamental behavior of the port in question. A port can be in one of three modes as described below. Whenever a particular mode is selected, the remaining fields in that row will be either grayed out or made changeable depending on the mode in question. Grayed out fields show the value that the port will get when the mode is applied. Access: Access ports are normally used to connect to end stations. Dynamic features like 165
![](/manual_guide/products/dlink-dis300g12sw-product-manual-363ddfb/165.png)