D-Link DIS-300G-14PSW Product Manual - Page 136
Profile Management, Button, Port Role, Inactive, Source, Receiver, Be Caution, Immediate Leave
![]() |
View all D-Link DIS-300G-14PSW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Profile Management Button Port Port Role Immediate Leave (of the MVR VLAN) will be shown by clicking the view button. Profile selected for designated interface channel is not allowed to have overlapped permit group address. You can inspect the rules of the designated profile by using the following button: : List the rules associated with the designated profile. The logical port for the settings. Configure an MVR port of the designated MVR VLAN as one of the following roles. Inactive: The designated port does not participate MVR operations. Source: Configure uplink ports that receive and send multicast data as source ports. Subscribers cannot be directly connected to source ports. Receiver: Configure a port as a receiver port if it is a subscriber port and should only receive multicast data. It does not receive data unless it becomes a member of the multicast group by issuing IGMP/MLD messages. Be Caution: MVR source ports are not recommended to be overlapped with management VLAN ports. Select the port role by clicking the Role symbol to switch the setting. I indicates Inactive; S indicates Source; R indicates Receiver The default Role is Inactive. Enable the fast leave on the port. Buttons Click to add new MVR VLAN. Specify the VID and configure the new entry. Click "Save". Click to save changes. Click to undo any changes made locally and revert to previously saved values. 136
![](/manual_guide/products/dlink-dis300g12sw-product-manual-363ddfb/136.png)