Home » D-Link Manuals » Hubs & Switches » D-Link DIS-300G-14PSW » Manual Viewer

D-Link DIS-300G-14PSW Product Manual - Page 156

Video Conferencing, Streaming, Video Signalling, Untagged, Tagged, VLAN ID, L2 Priority, Priority,

View all D-Link DIS-300G-14PSW manuals

Add to My Manuals
Save this manual to your list of manuals

Page 156 highlights

Tag VLAN ID L2 Priority DSCP Adding a new policy 6. Video Conferencing - for use by dedicated Video Conferencing equipment and other similar appliances supporting real-time interactive video/audio services. 7. Streaming Video - for use by broadcast or multicast based video content distribution and other similar applications supporting streaming video services that require specific network policy treatment. Video applications relying on TCP with buffering would not be an intended use of this application type. 8. Video Signalling (conditional) - for use in network topologies that require a separate policy for the video signalling than for the video media. This application type should not be advertised if all the same network policies apply as those advertised in the Video Conferencing application policy. Tag indicating whether the specified application type is using a 'tagged' or an 'untagged' VLAN. Untagged indicates that the device is using an untagged frame format and as such does not include a tag header as defined by IEEE 802.1Q-2003. In this case, both the VLAN ID and the Layer 2 priority fields are ignored and only the DSCP value has relevance. Tagged indicates that the device is using the IEEE 802.1Q tagged frame format, and that both the VLAN ID and the Layer 2 priority values are being used, as well as the DSCP value. The tagged format includes an additional field, known as the tag header. The tagged frame format also includes priority tagged frames as defined by IEEE 802.1Q-2003. VLAN identifier (VID) for the port as defined in IEEE 802.1Q-2003. L2 Priority is the Layer 2 priority to be used for the specified application type. L2 Priority may specify one of eight priority levels (0 through 7), as defined by IEEE 802.1D-2004. A value of 0 represents use of the default priority as defined in IEEE 802.1D-2004. DSCP value to be used to provide Diffserv node behaviour for the specified application type as defined in IETF RFC 2474. DSCP may contain one of 64 code point values (0 through 63). A value of 0 represents use of the default DSCP value as defined in RFC 2475. Click to add a new policy. Specify the Application type, Tag, VLAN ID, L2 Priority and DSCP for the new policy. Click "Save". 156

Section	Page
1. Introductions	13
1.1 System Description	13
1.2 Using the Web Interface	13
1.2.1 Web Browser Support	13
1.2.2 Navigation	14
1.2.3 Title Bar Icons	14
1.2.4 Ending a Session	15
1.3 Using the Online Help	15
2. Using the Web	16
2.1 Login	16
2.2 Tree View	17
2.2.1 Configuration Menu	17
2.2.2 Monitor Menu	18
2.2.3 Diagnostics Menu	19
2.2.4 Maintenance Menu	19
2.3 Configuration	20
2.3.1 System	20
2.3.2 System Information	20
2.3.3 System IP	21
2.3.4 System NTP	24
2.3.5 System Time	25
2.3.6 System Log	27
2.3.7 System Alarm Profile	28
2.3.8 Green Ethernet	31
2.3.9 Port Power Savings	31
2.3.10 Port	33
2.3.11 DHCP	35
2.3.12 DHCP Server	35
2.3.13 DHCP Server Mode	35
2.3.14 DHCP Server Excluded IP	37
2.3.15 DHCP Server Pool	38
2.3.16 DHCP Snooping	39
2.3.17 DHCP Relay	40
2.3.18 Security	42
2.3.19 Switch	42
2.3.20 Users	42
2.3.21 Privilege Level	44
2.3.22 Auth Method	46
2.3.23 SSH	48
2.3.24 HTTPS	49
2.3.25 Access Management	49
2.3.26 SNMP	51
2.3.27 SNMP System Configuration	51
2.3.28 SNMP Trap Configuration	53
2.3.29 SNMP Communities	57
2.3.30 SNMP Users	58
2.3.31 SNMP Groups	60
2.3.32 SNMP Views	62
2.3.33 SNMP Access	63
2.3.34 RMON	65
2.3.35 RMON Statistics	65
2.3.36 RMON History	66
2.3.37 RMON Alarm	67
2.3.38 RMON Event	69
2.3.39 Network	71
2.3.40 Limit Control	71
2.3.41 NAS	74
2.3.42 ACL	84
2.3.43 ACL Port	84
2.3.44 ACL Rate Limiters	86
2.3.45 Access Control List	88
2.3.46 IP Source Guard	99
2.3.47 IP Source Guard Configuration	99
2.3.48 IP Source Guard Static Table	101
2.3.49 ARP Inspection	102
2.3.50 Port Configuration	102
2.3.51 VLAN Configuration	104
2.3.52 Static Table	106
2.3.53 Dynamic Table	107
2.3.54 AAA	109
2.3.55 RADIUS	109
2.3.56 TACACS+	111
2.3.57 Aggregation	113
2.3.58 Static Aggregation	113
2.3.59 LACP Aggregation	115
2.3.60 Loop Protection	117
2.3.61 Spanning Tree	119
2.3.62 Bridge Settings	119
2.3.63 MSTI Mapping	121
2.3.64 MSTI Priorities	123
2.3.65 CIST Ports	124
2.3.66 MSTI Ports	127
2.3.67 IPMC Profile	130
2.3.68 Profile Table	130
2.3.69 Address Entry	132
2.3.70 MVR	134
2.3.71 IPMC	137
2.3.72 IGMP Snooping	137
2.3.73 Basic Configuration	137
2.3.74 VLAN Configuration	139
2.3.75 Port Filtering Profile	142
2.3.76 MLD Snooping	143
2.3.77 Basic Configuration	143
2.3.78 VLAN Configuration	145
2.3.79 Port Filtering Profile	148
2.3.80 LLDP	149
2.3.81 LLDP	149
2.3.82 LLDP-MED	151
2.3.83 PoE	158
2.3.84 PoE Scheduler	160
2.3.85 Power Reset	162
2.3.86 MAC Table	163
2.3.87 VLANs	164
2.3.88 Private VLANs	169
2.3.89 Membership	169
2.3.90 Port Isolation	171
2.3.91 VCL	172
2.3.92 MAC-based VLAN	172
2.3.93 Protocol-based VLAN	174
2.3.94 Protocol to Group	174
2.3.95 Group to VLAN	176
2.3.96 IP Subnet-based VLAN	178
2.3.97 Voice VLAN	179
2.3.98 Voice VLAN Configuration	179
2.3.99 Voice VLAN OUI	182
2.3.100 QoS	183
2.3.101 Port Classification	183
2.3.102 Port Policing	186
2.3.103 Port Scheduler	188
2.3.104 Port Shaping	189
2.3.105 Port Tag Remarking	190
2.3.106 Port DSCP	191
2.3.107 DSCP-Based QoS	192
2.3.108 DSCP Translation	195
2.3.109 DSCP Classification	198
2.3.110 QoS Control List	199
2.3.111 Storm Control	204
2.3.112 Mirror	206
2.3.113 GVRP	208
2.3.114 Global Config	208
2.3.115 Port Config	209
2.3.116 sFlow	209
2.3.117 RingV2	213
2.3.118 DDM	216
2.4 Monitor	217
2.4.1 System	217
2.4.2 System Information	217
2.4.3 CPU Load	219
2.4.4 IP Status	220
2.4.5 System Log	222
2.4.6 System Detailed Log	224
2.4.7 System Alarm	224
2.4.8 Green Ethernet	226
2.4.9 Port Power Saving	226
2.4.10 Ports	227
2.4.11 Ports State	227
2.4.12 Trafice Overview	229
2.4.13 QoS Statistics	230
2.4.14 QCL Status	231
2.4.15 Detailed Statistics	233
2.4.16 DHCP	235
2.4.17 DHCP Server	235
2.4.18 Statistics	235
2.4.19 Binding	237
2.4.20 Declined IP	238
2.4.21 DHCP Snooping Table	239
2.4.22 DHCP Relay Statistics	241
2.4.23 DHCP Detailed Statistics	243
2.4.24 Security	245
2.4.25 Accessment Management Statistics	245
2.4.26 Network	246
2.4.27 Port Security	246
2.4.28 Switch	246
2.4.29 Port	248
2.4.30 NAS	250
2.4.31 Switch	250
2.4.32 Port	252
2.4.33 ACL Status	255
2.4.34 ARP Inspection	257
2.4.35 IP Source Guard	259
2.4.36 AAA	261
2.4.37 RADIUS Overview	261
2.4.38 RADIUS Details	263
2.4.39 Switch	264
2.4.40 RMON	264
2.4.41 Statistics	264
2.4.42 History	266
2.4.43 Alarm	268
2.4.44 Event	269
2.4.45 LACP	270
2.4.46 System Status	270
2.4.47 Port Status	271
2.4.48 Port Statistics	272
2.4.49 Loop Protection	273
2.4.50 Spanning Tree	274
2.4.51 Bridge Status	274
2.4.52 Port Status	275
2.4.53 Port Statistics	276
2.4.54 MVR	277
2.4.55 MVR Statistics	277
2.4.56 MVR Channel Groups	278
2.4.57 MVR SFM Information	280
2.4.58 IPMC	282
2.4.59 IGMP Snooping	282
2.4.60 IGMP Snooping Status	282
2.4.61 Groups Information	284
2.4.62 IPv4 SFM Information	286
2.4.63 MLD Snooping	288
2.4.64 MLD Snooping Status	288
2.4.65 Groups Information	290
2.4.66 IPv6 SFM Information	292
2.4.67 LLDP	294
2.4.68 Neighbors	294
2.4.69 LLDP-MED Neighbors	296
2.4.70 EEE	301
2.4.71 Port Statistics	303
2.4.72 PoE	304
2.4.73 MAC Table	307
2.4.74 VLANs	309
2.4.75 VLANs Membership	309
2.4.76 VLANs Ports	311
2.4.77 VCL	313
2.4.78 MAC-Based VLAN	313
2.4.79 sFlow	314
2.4.80 RingV2	315
2.4.81 DDMI Overview	316
2.4.82 DDMI Detailed	317
2.5 Diagnostics	319
2.5.1 Ping	319
2.5.2 Ping6	321
2.5.3 VeriPHY	323
2.6 Maintenance	326
2.6.1 Restart Device	326
2.6.2 Factory Default	327
2.6.3 Software	328
2.6.3.1 Software Upload	328
2.6.3.2 Image select	329
2.6.4 Configuration	331
2.6.4.1 Save startup-config	331
2.6.4.2 Download	332
2.6.4.3 Upload	333
2.6.4.4 Activate	333

Match case Limit results 1 per page

156

Video Conferencing

- for use by dedicated Video Conferencing equipment and

other similar appliances supporting real-time interactive video/audio services.

Streaming

Video - for use by broadcast or multicast based video content

distribution and other similar applications supporting streaming video services that

require specific network policy treatment. Video applications relying on TCP with

buffering would not be an intended use of this application type.

Video Signalling

(conditional) - for use in network topologies that require a

separate policy for the video signalling than for the video media. This application type

should not be advertised if all the same network policies apply as those advertised in

the

Video Conferencing

application policy.

Tag

indicating whether the specified application type is using a 'tagged' or an

'untagged' VLAN.

Untagged

indicates that the device is using an untagged frame format and as such

does not include a tag header as defined by IEEE 802.1Q-2003. In this case, both

the VLAN ID and the Layer 2 priority fields are ignored and only the DSCP value has

relevance.

Tagged

indicates that the device is using the IEEE 802.1Q tagged frame format, and

that both the VLAN ID and the Layer 2 priority values are being used, as well as the

DSCP value. The tagged format includes an additional field, known as the tag

header. The tagged frame format also includes priority tagged frames as defined by

IEEE 802.1Q-2003.

VLAN ID

VLAN identifier (VID) for the port as defined in IEEE 802.1Q-2003.

L2 Priority

is the Layer 2 priority to be used for the specified application type.

Priority

may specify one of eight priority levels (0 through 7), as defined by IEEE

802.1D-2004. A value of 0 represents use of the default priority as defined in IEEE

802.1D-2004.

DSCP

value to be used to provide Diffserv node behaviour for the specified

application type as defined in IETF RFC 2474.

DSCP

may contain one of 64 code

point values (0 through 63). A value of 0 represents use of the default DSCP value as

defined in RFC 2475.

Adding a new policy

Click

to add a new policy. Specify the

Application

type

Tag

VLAN ID

L2 Priority

and

DSCP

for the new policy. Click

"Save".