D-Link DIS-300G-14PSW Product Manual - Page 34
Buttons, Flow Control, Maximum Frame Size, Excessive Collision Mode
View all D-Link DIS-300G-14PSW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Flow Control Maximum Frame Size Excessive Collision Mode When Auto Speed is selected on a port, this section indicates the flow control capability that is advertised to the link partner. When a fixed-speed setting is selected, that is what is used. The Current Rx column indicates whether pause frames on the port are obeyed, and the Current Tx column indicates whether pause frames on the port are transmitted. The Rx and Tx settings are determined by the result of the last Auto-Negotiation. Check the configured column to use flow control. This setting is related to the setting for Configured Link Speed. Enter the maximum frame size allowed for the switch port, including FCS. Configure port transmit collision behavior. Discard: Discard frame after 16 collisions (default). Restart: Restart backoff algorithm after 16 collisions. Buttons Click to save changes. Click to undo any changes made locally and revert to previously saved values. Click to refresh the page. Any changes made locally will be undone. 34