D-Link DIS-300G-14PSW Product Manual - Page 145
VLAN Configuration
![]() |
View all D-Link DIS-300G-14PSW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Command Descriptions 2.3.78 VLAN Configuration Each page shows up to 99 entries from the VLAN table, default being 20, selected through the "entries per page" input field. When first visited, the web page will show the first 20 entries from the beginning of the VLAN Table. The first displayed will be the one with the lowest VLAN ID found in the VLAN Table. The "VLAN" input fields allow the user to select the starting point in the VLAN Table. Object Delete VLAN ID MLD Snooping Enabled Querier Election Compatibility PRI RV Description Check to delete the entry. The designated entry will be deleted during the next save. The VLAN ID of the entry. Enable the per-VLAN MLD Snooping. Up to 32 VLANs can be selected for MLD Snooping. Enable to join MLD Querier election in the VLAN. Disable to act as a MLD NonQuerier. Compatibility is maintained by hosts and routers taking appropriate actions depending on the versions of MLD operating on hosts and routers within a network. The allowed selection is MLD-Auto, Forced MLDv1, Forced MLDv2, default compatibility value is MLD-Auto. Priority of Interface. It indicates the MLD control frame priority level generated by the system. These values can be used to prioritize different classes of traffic. The allowed range is 0 (best effort) to 7 (highest), default interface priority value is 0. Robustness Variable. The Robustness Variable allows tuning for the expected packet loss on a link. The allowed range is 1 to 255, default robustness variable value is 2. 145
![](/manual_guide/products/dlink-dis300g12sw-product-manual-363ddfb/145.png)