D-Link DIS-300G-14PSW Product Manual - Page 329
Image select
![]() |
View all D-Link DIS-300G-14PSW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 329 highlights
2.6.3.2 Image select Command Descriptions This page provides information about the active and alternate (backup) firmware images in the device, and allows you to revert to the alternate image. The web page displays two tables with information about the active and alternate firmware images. Note: 1. In case the active firmware image is the alternate image, only the "Active Image" table is shown. In this case, the Activate Alternate Image button is also disabled. 2. If the alternate image is active (due to a corruption of the primary image or by manual intervention), uploading a new firmware image to the device will automatically use the primary image slot and activate this. 3. The firmware version and date information may be empty for older firmware releases. This does not constitute an error. Object Image Version Data Description The flash index name of the firmware image. The name of primary (preferred) image is image, the alternate image is named image.bk. The version of the firmware image. The date where the firmware was produced. 329
![](/manual_guide/products/dlink-dis300g12sw-product-manual-363ddfb/329.png)