D-Link DIS-300G-14PSW Product Manual - Page 35
DHCP, 3.12 DHCP Server, 3.13 DHCP Server Mode
![]() |
View all D-Link DIS-300G-14PSW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Command Descriptions 2.3.11 DHCP 2.3.12 DHCP Server 2.3.13 DHCP Server Mode This page configures global mode and VLAN mode to enable/disable DHCP server per system and per VLAN. Object Global Mode Mode VLAN Mode VLAN Range Description Configure the operation mode per system. Possible modes are: Enabled: Enable DHCP server per system. Disabled: Disable DHCP server pre system. Indicate the VLAN range in which DHCP server is enabled or disabled. The first VLAN ID must be smaller than or equal to the second VLAN ID. BUT, if the VLAN range contains only 1 VLAN ID, then you can just input it into either one of the first and second VLAN ID or both. On the other hand, if you want to disable existed VLAN range, then you can follow the steps. 1. press to add a new VLAN range. 2. input the VLAN range that you want to disable. 35
![](/manual_guide/products/dlink-dis300g12sw-product-manual-363ddfb/35.png)