D-Link DIS-300G-14PSW Product Manual - Page 179
Voice VLAN, 3.98 Voice VLAN Configuration
![]() |
View all D-Link DIS-300G-14PSW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
Command Descriptions The button can be used to undo the addition of new IP subnet-based VLANs. The maximum possible IP subnet-based VLAN entries are limited to 128. Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds. Refreshes the displayed table. 2.3.97 Voice VLAN 2.3.98 Voice VLAN Configuration The Voice VLAN feature enables voice traffic forwarding on the Voice VLAN, then the switch can classify and schedule network traffic. It is recommended that there be two VLANs on a port - one for voice, one for data. Before connecting the IP device to the switch, the IP phone should configure the voice VLAN ID correctly. It should be configured through its own GUI. 179
![](/manual_guide/products/dlink-dis300g12sw-product-manual-363ddfb/179.png)
Command Descriptions
179
The button can be used to undo the addition of new IP subnet-based VLANs. The
maximum possible IP subnet-based VLAN entries are limited to 128.
Check this box to refresh the page automatically. Automatic refresh occurs every 3
seconds.
Refreshes the displayed table.
2.3.97 Voice VLAN
2.3.98 Voice VLAN Configuration
The Voice VLAN feature enables voice traffic forwarding on the Voice VLAN, then the switch can
classify and schedule network traffic. It is recommended that there be two VLANs on a port - one for
voice, one for data. Before connecting the
IP
device to the switch, the IP phone should configure the
voice
VLAN ID
correctly. It should be configured through its own GUI.