D-Link DNS-320 User Manual - Page 68
RAID Configuration - RAID 0
UPC - 790069347283
View all D-Link DNS-320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
D-Link ShareCenter Pulse User Manual RAID Configuration - RAID 0 RAID 0: There are 4 types of RAID configuration to choose from, Standard, JBOD, RAID 0 and RAID 1. This section covers the RAID 0 configuration. Select A RAID Type: RAID 0 combines both hard drives in a striped fashion which will create one large volume geared towards maximum performance. Click 'Next'. RAID Size Settings: In this section the user can view the available capacity that RAID 0 can use on the hard drives installed. Then the user can configure the desired capacity to be used for the RAID 0 configuration by entering the desired capacity amount in the block provided. To utilize the remaining space, (if the two HDDs differ in capacity), the user can choose to use JBOD for the remaining space. Tick this option is needed. Click 'Next'. Summary: The next window will display the volumes connected and prompts that the RAID configuration will commence. When ready click on the 'Format' button to initiate the RAID configuration. This process will involve initializing, formatting and configuration of the RAID chosen. A warning message will be displayed before the procedure starts stating that hard drives will be formatted and if the user wishes to continue. Click 'OK' to continue. After the configuration has completed the user will be prompted to click on the 'Finish' button. Page 68