D-Link DNS-320 User Manual - Page 91

Replacing or Adding a New Hard Drive, Secure HTTP Login

Get D-Link DNS-320 PDF manuals and user guides
UPC - 790069347283
View all D-Link DNS-320 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 91 highlights

D-Link ShareCenter Pulse User Manual Replacing or Adding a New Hard Drive It is recommended that you backup your important files before replacing or adding a new hard drive to the ShareCenter Pulse. Replacing a Hard Drive: Please make sure the power is off before replacing a hard drive. After you have installed the new drive, turn on the ShareCenter Pulse and then connect to the Web UI. The ShareCenter Pulse will prompt you to format the new drive (Standard, RAID 1 mode) or both drives (JBOD, RAID 0 mode). Adding a New Hard Drive: The ShareCenter Pulse is able to work with one single hard drive under Standard mode. Please make sure the power is off before installing a second hard drive. After you have installed the new drive, turn on the ShareCenter Pulse and then connect to the Web UI. The ShareCenter Pulse will prompt you to format the new drive. Note: Formatting a hard drive will erase the data stored on the hard drive. Please backup important data before formatting a hard drive. Secure HTTP Login Apart from logging into the web user interface using the normal http://192.168.0.32/, user can also login to the web configuration using secure https. 1) Open Internet Explorer and type https://192.168.0.32 2) Login to the ShareCenter Pulse as per normal. Page 91

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
D-Link ShareCenter Pulse User Manual
Page 91
Replacing or Adding a New Hard Drive
It is recommended that you backup your important files before replacing or adding a new hard drive to the ShareCenter Pulse.
Replacing a Hard Drive:
Please make sure the power is off before replacing a hard drive. After you have installed the new drive, turn on the ShareCenter Pulse and then connect to the Web UI. The
ShareCenter Pulse will prompt you to format the new drive (Standard, RAID 1 mode) or both drives (JBOD, RAID 0 mode).
Adding a New Hard Drive:
The ShareCenter Pulse is able to work with one single hard drive under Standard mode. Please make sure the power is off before installing a second hard drive. After you
have installed the new drive, turn on the ShareCenter Pulse and then connect to the Web UI. The ShareCenter Pulse will prompt you to format the new drive.
Note: Formatting a hard drive will erase the data stored on the hard drive. Please backup important data before formatting a hard drive.
Secure HTTP Login
Apart from logging into the web user interface using the normal http://192.168.0.32/, user can also login to the web configuration using secure https.
1) Open Internet Explorer and type https://192.168.0.32
2) Login to the ShareCenter Pulse as per normal.