D-Link DSN-3400-20 User Guide - Page 36
Powering Off the xStack Storage Array
UPC - 790069299773
View all D-Link DSN-3400-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
2.6 Powering Off the xStack Storage Array If you no longer want to use the xStack Storage system, use the following procedure to power it off. The following steps are required for shutting down the xStack Storage system. Failing to use this procedure to shut down the array will result in battery power degradation if a UPS is not used. If the battery charge exhausts, you will lose data. 1. Log off from all initiators. 2. In the View panel, click System Administration. 4. Click the Settings tab. The Settings tab appears in the Detail Tabs area (see Figure 2-13). Figure 2-13. Settings Tab 3. On the right side of the tab, click Shutdown. 4. Wait for the Ready LED on the array front panel to go off. Then manually power off your xStack Storage system and any expansion arrays according to the instructions in the hardware reference guide. 26 Chapter 2 Getting Started