D-Link DSN-3400-20 User Guide - Page 97
Working with Management Ports, 2.1 Viewing or Changing Management Port Settings
UPC - 790069299773
View all D-Link DSN-3400-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
6.2 Working with Management Ports The xStack Storage system contains a management port that provides access to the xStack Storage Management Center. In the Network Settings View, the management port associated with the xStack Storage system appears below Network Settings in the Main Display. The following sections describe how to view or change the settings of the management port and how to ping from the management port to check its connection. 6.2.1 Viewing or Changing Management Port Settings You configure the xStack Storage's management port settings using the initial Startup Wizard. Thereafter, you can use the following procedure to view or change the xStack Storage's management port settings. If you change these settings, you must: Restart the xStack Storage system for the new settings to take effect. In addition: Configure the NIC in the management PC to use the first 3 octets of the new IP address (in the example in Figure 6-2, the first three octets are 192.168.0). Enter the new IP address in your Web browser to access the xStack Storage Management Center. While not required, changing the hostname to one that is intuitive is recommended for identification and troubleshooting purposes. To view or change management port settings: 1. In the Network Settings View, click the management port in the Main Display. The Management Port tab shows the settings for the selected management port (see Figure 6-2). xStack Storage Management Center Software User's Guide 87