D-Link DSN-3400-20 User Guide - Page 48

- For adjacent disks, click the first one, then hold down the Shift key and click the last one. The first and last disks, and all the disks between them, get selected. - For non-adjacent disks, click the first one, then hold down the Ctrl key and click each subsequent disk. - To deselect a disk, hold down the Ctrl key and click a disk that is selected. 6. Click Next. If you selected Stripe/Mirror, Parity, or Stripe, a Stripe Depth screen similar to the one in Figure 3-16 appears and you should proceed to the next step. Otherwise, the Volume Size screen appears (see Figure 3-17) and you should skip to step 8. Figure 3-16. Stripe Depth Screen 7. By default, the Wizard will select the stripe depth (chunk size) for volumes configured as stripe/mirror, parity, or stripe. If you prefer, use the Stripe Depth drop-down list to select from one of the commonly used chunk sizes. Click Next. The Volume Size screen appears (see Figure 3-17). 38 Chapter 3 Managing Volumes