Home » D-Link Manuals » Hubs & Switches » D-Link DSS-200G-28MPP » Manual Viewer

D-Link DSS-200G-28MPP Product Manual - Page 133

Appendix B - Technical Specifications, Hardware Specifications, Key Components / Performance

View all D-Link DSS-200G-28MPP manuals

Add to My Manuals
Save this manual to your list of manuals

Page 133 highlights

D-Link DSS-200G MP/MPP Series Switch User Manual 7. Appendix B - Technical Specifications Hardware Specifications Key Components / Performance Switching Capacity: -DSS-200G-10MP: 20Gbps - DSS-200G-10MPP: 20Gbps - DSS-200G-28MP: 56Gbps - DSS-200G-28MPP: 56Gbps Max. Forwarding Rate: -DSS-200G-10MP: 14.88Mpps - DSS-200G-10MPP: 14.88Mpps - DSS-200G-28MP: 41.67Mpps - DSS-200G-28MPP: 41.67Mpps Forwarding Mode: Store and Forward Packet Buffer memory: - DSS-200G-10MP: 4.1Mbits - DSS-200G-10MPP: 4.1Mbits - DSS-200G-28MP: 4.1Mbits - DSS-200G-28MPP: 4.1Mbits Flash Memory: 32M Byte Port Functions 10/100/1000BaseTX ports compliant with the following standards: - IEEE 802.3 - IEEE 802.3u - IEEE 802.3ab - IEEE802.3at - IEEE 802.3af -IEEE 802.3bt (DSS-200G MPP Series only) -Supports Full/half-Duplex operations at 10/100Mbps - Supports Full-Duplex operation at 1000Mbps - Supports IEEE 802.3x Flow Control - Support Auto-Negotiation - Compliant to IEEE 802.3az Energy Efficiency Ethernet. SFP ports compliant with the following standards: - IEEE 802.3u compliance - IEEE 802.3z compliance Physical & Environment Maximum Power Consumption - DSS-200G-10MP: 9.63 W (POE OFF) 160.2 W (POE ON) - DSS-200G-10MPP: 15.4 W (POE OFF) 267.5 W (POE ON) - DSS-200G-28MP: 25.5 W (POE OFF) 425.9 W (POE ON) - DSS-200G-28MPP: 23.52 W (POE OFF) 579.3 W (POE ON) Standby Power Consumption - DSS-200G-10MP: 9.53 W - DSS-200G-10MPP: 15.4 W - DSS-200G-28MP: 25.2 W - DSS-200G-28MPP: 23.12 W Power input:100~240 VAC, 50/60Hz, internal universal power supply Acoustic Value: - DSS-200G-10MP: 0dB (fanless) - DSS-200G-10MPP PoE input 210-242W, 8571RPM: 49.9dB PoE input 180-210W, 6483RPM: 43.5dB PoE input 150-180W, 5777RPM: 40.1dB PoE input 120-150W, 4834RPM: 36.4dB PoE input 90-120W, 3892RPM: 33.2dB PoE input 60-90W, 2976RPM: 30.8dB PoE input 30-60W, 2374RPM: 28.5dB PoE input 0-30W, 1678RPM: 26.1dB - DSS-200G-28MP PoE input 322.8-370W, 7533RPM: 43.2dB PoE input 282.3-322.8W, 6510RPM: 41.1dB PoE input 241.7-282.3W, 5836RPM: 38.8dB PoE input 201.9-241.7W, 4905RPM:B 36.5dB PoE input 161.3-201.9W, 4008RPM: 34.8dB PoE input 121.2-161.3W, 3050RPM: 33.2dB PoE input 80.5-121.2W, 2448RPM: 32.6dB PoE input 0-80.5W, 1692PM: 32.4dB - DSS-200G-28MPP: PoE input 313-518W, 10226RPM: 50.6dB PoE input 274-313W, 7774RPM: 44.3dB PoE input 243-274W, 6734RPM: 41.8dB PoE input 196-243W, 5833RPM: 38.1dB PoE input 155-196W, 4874RPM: 34.6dB PoE input 115-155W, 3775PM: 31.7dB PoE input 77-115W, 2875RPM: 29.2dB PoE input 0-77W, 1936PM: 26.1dB 128

Section	Page
Table of Contents	3
1. Introduction	6
Audience	6
Standard Mode and Surveillance Mode	6
Other Documentation	7
Conventions	7
Notes, Notices, and Cautions	7
2. Product Introduction	8
DSS-200G-10MP	9
Front Panel	9
Rear Panel	12
DSS-200G-10MPP	12
Front Panel	12
Rear Panel	15
DSS-200G-28MP	16
Front Panel	16
Rear Panel	19
DSS-200G-28MPP	20
Front Panel	20
Rear Panel	23
3. Hardware Installation	24
Step1: Unpacking	24
Packing Contents	24
Step2: Switch Installation	24
Desktop or Shelf Installation	24
Rack Installation	24
Step 3: Plugging in the AC Power Cord	26
Power Failure	26
Grounding the Switch	26
Connecting the Alarm Cable	27
Connecting the PoE Cable	27
4. Web-based Switch Configuration	30
Management Options	30
Connecting using the Web User Interface	30
Logging onto the Web User Interface	31
Smart Wizard	32
Web User Interface – Standard Mode	35
Areas of the User Interface	35
Device Information	35
System	36
System Information Settings	36
System Information	36
IPv4 Interface	36
IPv6 Interface	37
Port Configuration	38
Port Settings	38
Port Status	39
Jumbo Frame	39
PoE	40
PoE System	40
PoE Configuration	40
PD Alive	41
System Log	43
System Log Settings	43
System Log Server Settings	43
System Log	44
Time	45
Clock Settings	45
Time Zone Settings	45
SNTP Settings	46
Time Range	47
Management	48
User Account Settings	48
SNMP	49
SNMP Global Settings	50
SNMP Community Table Settings	50
SNMP Host Table Settings	51
HTTP/HTTPS	52
D-Link Discovery Protocol	52
Layer 2 Features	54
FDB	54
Static FDB	54
Unicast Static FDB	54
Multicast Static FDB	54
MAC Address Table Settings	55
MAC Address Table	56
VLAN	57
VLAN Configuration Wizard	57
802.1Q VLAN	58
VLAN Interface	58
Port-based VLAN	61
Management VLAN	62
Asymmetric VLAN	63
Auto Surveillance VLAN	63
Auto Surveillance Properties	63
MAC Settings and Surveillance Device	64
Voice VLAN	65
Voice VLAN Global	65
Voice VLAN Port	66
Voice VLAN OUI	66
Voice VLAN Device	67
Spanning Tree	68
STP Global Settings	69
STP Port Settings	69
Loopback Detection	70
Link Aggregation	72
L2 Multicast Control	75
IGMP Snooping	75
IGMP Snooping Settings	75
IGMP Snooping Groups Settings	76
Fast Leave Status Settings	76
IGMP Snooping Mrouter Settings	77
Multicast Filtering	77
LLDP	79
LLDP Global Settings	79
LLDP Neighbor Port Information	79
QoS	80
802.1p Priority	80
Port Rate Limiting	81
Security	82
Safeguard Engine Settings	82
Traffic Segmentation	82
Storm Control	83
DoS Attack Prevention Settings	83
Zone Defense Settings	84
SSL	85
SSL Global Settings	85
OAM	86
Cable Diagnostics	86
Monitoring	87
Statistics	87
Port Counters	87
Mirror Settings	87
Green	89
Power Saving	89
EEE	90
ONVIF	92
Global Status	92
IP-Camera Information	93
Dip Switch	94
Dip Status	94
Extend	95
Save and Tools	96
Save Configuration	96
Firmware Information	96
Firmware Upgrade	96
Firmware Upgrade from HTTP	97
Firmware Upgrade from TFTP	97
Configuration Restore & Backup	98
Configuration Restore from HTTP	98
Configuration Restore from TFTP	98
Configuration Backup to HTTP	99
Configuration Backup to TFTP	99
Log Backup	100
Log Backup to HTTP	100
Log Backup to TFTP	100
Ping	101
Reset	101
Reboot System	102
5. Surveillance	103
Web User Interface – Surveillance Mode	103
Areas of the User Interface	104
Surveillance Topology	105
Enabling and Disabling PoE	108
Device Information	109
Port Information	110
Group Details	112
IP-Camera Information	113
PoE Information	115
PoE Scheduling	117
PD Alive	119
Time	120
Clock Settings	120
SNTP Settings	120
Surveillance Settings	122
Surveillance Log	124
Health Diagnostic	125
Save and Tools	126
Firmware Information	126
Firmware Upgrade	126
Firmware Upgrade from HTTP	126
Configuration Restore & Backup	128
Configuration Restore from HTTP	128
Configuration Backup to HTTP	128
Reset	128
Reboot System	129
Help	130
Help	130
6. Appendix A - Ethernet Technology	131
Gigabit Ethernet Technology	131
Fast Ethernet Technology	131
Switching Technology	131
7. Appendix B - Technical Specifications	133
Hardware Specifications	133
Key Components / Performance	133
Port Functions	133
Physical & Environment	133
Emission (EMI) Certifications	134
Safety Certifications	134
Features	134
L2 Features	134
L2 Multicasting	134
VLAN	134
Quality of Service (QoS)	134
Security	134
Management	134
Power Saving	134
Surge Protection	134
8. Appendix C –Rack Mount Instructions	135

Match case Limit results 1 per page

D-Link DSS-200G MP/MPP Series Switch User Manual

128

Appendix B - Technical Specifications

Hardware

Specifications

Key Components /

Performance

Switching Capacity:

-DSS-200G-10MP: 20Gbps

- DSS-200G-10MPP: 20Gbps

- DSS-200G-28MP: 56Gbps

- DSS-200G-28MPP: 56Gbps

Max. Forwarding Rate:

-DSS-200G-10MP: 14.88Mpps

- DSS-200G-10MPP: 14.88Mpps

- DSS-200G-28MP: 41.67Mpps

- DSS-200G-28MPP: 41.67Mpps

Forwarding Mode: Store and Forward

Packet Buffer memory:

- DSS-200G-10MP: 4.1Mbits

- DSS-200G-10MPP: 4.1Mbits

- DSS-200G-28MP: 4.1Mbits

- DSS-200G-28MPP: 4.1Mbits

Flash Memory: 32M Byte

Port Functions

10/100/1000BaseTX ports compliant with

the following standards:

- IEEE 802.3

- IEEE 802.3u

- IEEE 802.3ab

- IEEE802.3at

- IEEE 802.3af

-IEEE 802.3bt (DSS-200G MPP Series only)

-Supports Full/half-Duplex operations at

10/100Mbps

- Supports Full-Duplex operation at

1000Mbps

- Supports IEEE 802.3x Flow Control

- Support Auto-Negotiation

- Compliant to IEEE 802.3az Energy

Efficiency Ethernet.

SFP ports compliant with the following

standards:

- IEEE 802.3u compliance

- IEEE 802.3z compliance

Physical &

Environment

Maximum Power Consumption

- DSS-200G-10MP:

9.63 W (POE OFF)

160.2 W (POE ON)

- DSS-200G-10MPP:

15.4 W (POE OFF)

267.5 W (POE ON)

- DSS-200G-28MP:

25.5 W (POE OFF)

425.9

W (POE ON)

- DSS-200G-28MPP:

23.52 W (POE OFF)

579.3 W (POE ON)

Standby Power Consumption

- DSS-200G-10MP: 9.53 W

- DSS-200G-10MPP: 15.4 W

- DSS-200G-28MP: 25.2 W

- DSS-200G-28MPP: 23.12 W

Power

input:100~240

VAC,

50/60Hz,

internal universal power supply

Acoustic Value:

- DSS-200G-10MP:

0dB (fanless)

- DSS-200G-10MPP

PoE input 210-242W, 8571RPM: 49.9dB

PoE input 180-210W, 6483RPM: 43.5dB

PoE input 150-180W, 5777RPM: 40.1dB

PoE input 120-150W, 4834RPM: 36.4dB

PoE input 90-120W, 3892RPM: 33.2dB

PoE input 60-90W, 2976RPM: 30.8dB

PoE input 30-60W, 2374RPM: 28.5dB

PoE input 0-30W, 1678RPM: 26.1dB

- DSS-200G-28MP

PoE input 322.8-370W, 7533RPM: 43.2dB

PoE input 282.3-322.8W, 6510RPM: 41.1dB

PoE input 241.7-282.3W, 5836RPM: 38.8dB

PoE input 201.9-241.7W, 4905RPM:B 36.5dB

PoE input 161.3-201.9W, 4008RPM: 34.8dB

PoE input 121.2-161.3W, 3050RPM: 33.2dB

PoE input 80.5-121.2W, 2448RPM: 32.6dB

PoE input 0-80.5W, 1692PM: 32.4dB

- DSS-200G-28MPP:

PoE input 313-518W, 10226RPM: 50.6dB

PoE input 274-313W, 7774RPM: 44.3dB

PoE input 243-274W, 6734RPM: 41.8dB

PoE input 196-243W, 5833RPM: 38.1dB

PoE input 155-196W, 4874RPM: 34.6dB

PoE input 115-155W, 3775PM: 31.7dB

PoE input 77-115W, 2875RPM: 29.2dB

PoE input 0-77W, 1936PM: 26.1dB