D-Link DSS-200G-28MPP Product Manual - Page 97

Firmware Upgrade from HTTP, Tools > Firmware Upgrade > Firmware Upgrade from HTTP

Get D-Link DSS-200G-28MPP PDF manuals and user guides View all D-Link DSS-200G-28MPP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 97 highlights

D-Link DSS-200G MP/MPP series Switch User Manual Firmware Upgrade from HTTP This window is used to initiate a firmware upgrade from a local PC using HTTP. To view the following window, click Tools > Firmware Upgrade > Firmware Upgrade from HTTP, as shown below: Figure 4-69 Firmware Upgrade from HTTP window The fields that can be configured are described below: Parameter Source File Description Enter the source filename and path of the firmware file located on the local PC. Alternatively click the Choose File button to navigate to the location of the firmware file located on the local PC. Click the Apply button to initiate the firmware upgrade. Firmware Upgrade from TFTP This window is used to initiate a firmware upgrade from a TFTP server. To view the following window, click Tools > Firmware Upgrade > firmware Upgrade from TFTP, as shown below: Figure 4-70 Firmware Upgrade from TFTP window The fields that can be configured are described below: Parameter TFTP Server IP Source File Description Enter the TFTP server's IPv4 address here. Enter the source filename and path of the firmware file located on the TFTP server here. Click the Upgrade button to initiate the firmware upgrade. 92

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
D-Link DSS-200G MP/MPP series Switch User Manual
92
Firmware Upgrade from HTTP
This window is used to initiate a firmware upgrade from a local PC using HTTP.
To view the following window, click
Tools > Firmware Upgrade > Firmware Upgrade from HTTP
,
as shown below:
Figure 4-69 Firmware Upgrade from HTTP window
The fields that can be configured are described below:
Parameter
Description
Source File
Enter the source filename and path of the firmware file located
on the local PC. Alternatively click the
Choose File
button to
navigate to the location of the firmware file located on the local
PC.
Click the
Apply
button to initiate the firmware upgrade.
Firmware Upgrade from TFTP
This window is used to initiate a firmware upgrade from a TFTP server.
To view the following window, click
Tools > Firmware Upgrade > firmware Upgrade from TFTP
, as
shown below:
Figure 4-70 Firmware Upgrade from TFTP window
The fields that can be configured are described below:
Parameter
Description
TFTP Server IP
Enter the TFTP server’s IPv4 address here.
Source File
Enter the source filename and path of the firmware file located
on the TFTP server here.
Click the
Upgrade
button to initiate the firmware upgrade.