D-Link R12 User Manual - Page 39
IPv4 - L2TP
![]() |
View all D-Link R12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Section 3 - Configuration IPv4 - L2TP Choose L2TP (Layer 2 Tunneling Protocol) if your Internet Service Provider (ISP) uses an L2TP connection. Your ISP will provide you with a username and password. Click Save at any time to save the changes you have made on this page. L2TP Server Username Password Reconnect Mode Maximum Idle Time Enter the L2TP server IP address provided by your ISP. Enter the username provided by your ISP. Enter the password provided by your ISP. Select Always on, On Demand, or Manual. Configurable when On Demand is selected. Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, select Always on or Manual as the reconnect mode. The default is 5 minutes. Address Mode Advanced Settings... Select Static IP if the following information is given by your ISP: IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP. Advanced Settings... - Dynamic IP Address Mode Shows your chosen address mode. Primary DNS Server Enter the primary DNS server IP address assigned by your ISP. Secondary DNS Server Enter the secondary DNS server IP address assigned by your ISP. D-Link R12 User Manual 34
![](/manual_guide/products/dlink-r12-user-manual-ec5fa33/39.png)