D-Link R12 User Manual - Page 44
Enable Automatic, IPv6 Address, Assignment, DHCP-PD in LAN, Autoconfiguration, Router, Advertisement
View all D-Link R12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Section 3 - Configuration Advanced Settings... - Address Autoconfiguration Settings Enable Automatic IPv6 Address Assignment Enable or disable the Automatic IPv6 Address Assignment feature. Enable Automatic DHCP-PD in LAN Enable or disable DHCP-PD for other IPv6 routers connected to a LAN interface. This option is only available if Enable DHCP-PD is enabled in the previous LAN IPv6 Address Settings. Autoconfiguration Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful Type DHCPv6. If you select SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type: Router Advertisement Lifetime Enter the router advertisement lifetime (in minutes). The default is 30 minutes. If you select Stateful DHCPv6 as the Autoconfiguration Type: IPv6 Address Enter the start IPv6 address for the DHCP server's IPv6 Range (Start) assignment. IPv6 Address Range (End) IPv6 Address Lifetime Enter the end IPv6 address for the DHCP server's IPv6 assignment. Enter the dynamic IP's retention time. The default is 10080 minutes. D-Link R12 User Manual 39