D-Link R12 User Manual - Page 76
Firewall Settings - IPv4/IPv6 Rules
View all D-Link R12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Section 3 - Configuration Firewall Settings - IPv4/IPv6 Rules Go to Features > Firewall, then click the IPv4 Rules tab or the IPv6 Rules tab to configure rules for traffic filtering based on parameters like IP addresses with port numbers. To configure the Firewall Advanced settings, click the Advanced link. Refer to Firewall on page 69 Click Save at any time to save the changes you have made on this page. To begin, use the drop-down menu to select whether it is an ALLOW or DENY rule. You can also choose to turn filtering OFF. If you want to remove a rule, click in the Delete column. If you wish to edit a rule, click in the Edit column. If you wish to create a new rule, click the Add Rule button. D-Link R12 User Manual 71
71
D-Link R12 User Manual
Section 3 - Configuration
Firewall Settings - IPv4/IPv6 Rules
To begin, use the drop-down menu to select whether it is an
ALLOW
or
DENY
rule. You can
also choose to turn filtering
OFF
.
If you want to remove a rule, click
in the Delete column. If you wish to edit a rule, click
in the Edit column. If you wish to create a new rule, click the
Add Rule
button.
Go to
Features
>
Firewall
, then click the
IPv4 Rules
tab or the
IPv6 Rules
tab to configure rules for traffic filtering based on
parameters like IP addresses with port numbers.
To configure the Firewall Advanced settings, click the
Advanced
link. Refer to
Firewall
on page
69
Click
Save
at any time to save the changes you have made on this page.