D-Link R12 User Manual - Page 81
Local IP, Protocol, Protocol Number, External Port, Schedule, TCP, UDP, Both, Other, Always Enable
View all D-Link R12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Section 3 - Configuration If you click on Edit or Add Rule, the following options will appear: Name Enter a name for the rule. Alternatively, select the protocol/ Application Name from the drop-down menu. Depending on the requested service, the router redirects the external service request to the appropriate internal host. Local IP Enter the IP address of the computer on your local network that you want to direct the incoming service to. Alternatively, select the device from the drop-down menu. Protocol Select the protocol of the traffic: TCP, UDP, Both, or Other. Protocol Number If you entered Other above, enter the protocol number. Refer to https://www.iana.org/assignments/protocol-numbers/ protocol-numbers.xhtml for Assigned Internet Protocol Numbers. External Port Enter the public port you want to open. Internal Port Enter the private port you want to open. Schedule Use the drop-down menu to select the time schedule for the rule. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Time & Schedule - Schedule on page 82 for more information. D-Link R12 User Manual 76