D-Link R12 User Manual - Page 73
Quality of Service QoS Engine, AI Traffic Optimizer
View all D-Link R12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Section 3 - Configuration This Quality of Service (QoS) Engine allows you to prioritize particular clients over others, so that these clients receive higher bandwidth. For example, if one client is streaming a movie and another is downloading a bulk of files, you might want to assign the former device a higher priority than the latter so that the movie streaming is not disrupted. Under Connected Clients, you will see device cards representing each connected client. To assign a priority level to a device, enable AI Traffic Optimizer first and save your settings. Then click the client to open its information page. It shows the following information: Device Name: The name that describes the client device. MAC Address: The MAC address of the client device. IPv4/IPv6 Address: The IP address in IPv4 and IPv6 addressing mechanism of the client device. Priority: Select the priority for the client device with the following categories: Normal; High: Always Enable, for 1 Day, for 4 Hours, for 2 Hours, or for 1 Hour; Low: Always Enable, for 1 Day, for 4 Hours, for 2 Hours, or for 1 Hour. D-Link R12 User Manual 68