D-Link R12 User Manual - Page 79
Always Enable, Schedules, Management, > Time & Schedule - Schedule, Local IP, TCP Port
View all D-Link R12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Section 3 - Configuration If you click Edit or Add Rule, the following options will appear: Name Enter a name for the rule. Local IP Enter the IP address of the computer on your local network to which you want to direct the incoming service. Alternatively, select the device from the drop-down menu. TCP Port Enter the TCP ports that you want to open. You can enter a single port or a range of ports. Separate ports with a comma (for example: 24,1009,3000-4000). UDP Port Enter the UDP ports that you want to open. You can enter a single port or a range of ports. Separate ports with a comma (for example: 24,1009,3000-4000). Schedule Use the drop-down menu to select the time schedule for the rule. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Management > Time & Schedule - Schedule on page 82 for more information. D-Link R12 User Manual 74